Custom Enclosures & Electrical Panels in Navsari, Gujarat

The reliability of electronics and power systems is only as good as the housing that protects them. The concept behind Custom Enclosures & Electrical Panel Manufacturing at Vidhee Eng. Works is to provide protective enclosures designed to safeguard sensitive electrical equipment, power distribution units and the people who rely on them from environmental and mechanical damage.

Being a trusted electrical panel manufacturer, we know that every application is a bit different. The protection requirements for a control system in a dusty factory setting are quite different to those of a small electronic device in an office or lab. That is why all our enclosures and panels are designed specifically for the application they serve, rather than taken off the shelf in the hope that they fit.

This is even more important when a project progresses from prototype to full production. When it comes to enclosures and panels, you need to design them around your internal PCB layout, thermal requirements, and compliance specifications — if you don't, then you'll end up with problems later, such as overheating, EMI or a panel that just doesn't pass certification.

From a custom enclosure for a new electronic product to a complete series of rugged electrical panels for plant automation, our team has the manufacturing know-how and technical expertise to ensure the job is done right.

Contact us today and we'll give you a no-cost, no-obligation quote for your enclosure or panel.

What Are Custom Enclosures & Electrical Panels?

An enclosure or electrical panel is a protective housing that serves two related purposes: to protect sensitive equipment from dust, moisture, impact and electrical interference and to prevent people from touching exposed wiring, live parts and moving parts.

As a control panel enclosure manufacturer, we work with a wide variety of enclosure sizes and shapes, from small, precision-fit boxes that hold a single circuit board to large, heavy-duty cabinets that house entire power distribution systems. All of these projects share a common need: the enclosure must match the equipment inside it, both in physical fit and in the level of environmental protection it provides.

This is where custom manufacturing has the edge over generic, off-the-shelf enclosures. A stock box may do for the moment, but a custom-designed box takes your exact PCB layout, cable entry points, ventilation and mounting requirements into account from the outset, giving you a far more reliable and better-fitting product in the end.

Core Types of Enclosures & Panels We Manufacture

Electronic Enclosures

Electronic enclosures are small enclosures designed to surround a specific PCB, user interface or sensor assembly. Electronic devices come in many shapes and serve many functions, so we offer enclosures in a variety of common styles, including rack-mount and desktop units, U-shaped chassis boxes and custom 5-sided boxes designed to fit your internal configuration.

These enclosures are usually made to tight tolerances, with exact cut-outs for connectors, displays or buttons. Ventilation and grounding must also be taken into account at the design stage; otherwise they lead to expensive rework later.

Industrial Electrical Panels

We produce large and robust electrical panels for heavier applications such as machinery housings, power distribution and plant automation. We have been making electrical panels for this kind of work for many years, and it calls for a higher level of build quality than smaller electrical enclosures.

An industrial panel is usually modular for easier installation and maintenance, has internally mounted C-plates to secure the components inside, and has rigid welded frames that can take the mechanical strain of an industrial environment. These panels are typically the main structure in a facility's electrical distribution or control system, so durability is a must, as are exact sizing and the correct placement of the components inside.

Junction Boxes

Junction boxes are smaller terminal enclosures that give wire connections a safe housing resistant to dust, water and dirt. Junction boxes are easier to build than a complete control panel, but they still need to be sealed, have entry points for the cables, and be suited to the conditions in which they will be used, especially where moisture or dust is likely to get in.

From Prototype to Custom Manufacturing

Many enclosure and panel projects do not start with a finalised design; they are first prototyped and validated before full production. This is one of the most crucial (and most neglected) steps of the manufacturing process.

Once a prototype has validated the internal PCB layout, the thermal design and the overall shape and size, the next stage is custom manufacturing: precise tolerances for cable entry and mounting holes, adherence to applicable electrical and safety standards, and keeping internal component temperatures within safe operating limits in use.

As a custom metal enclosures specialist, we work with our clients through this transition, reviewing prototype feedback, making design changes as needed and finalising manufacturing files that capture everything learned from the prototype. This way, what goes into full production is not simply an enlarged prototype but a properly designed final product.

Material Selection for Enclosures & Panels

Choosing the material for an enclosure or panel should not be taken lightly, as it directly affects the manufacturing process, the total cost of the enclosure and the physical and electrical protection it provides.

Sheet Metal (Steel/Aluminium)

In industrial and heavy-duty applications, sheet metal continues to be the material of choice, and the majority of our expertise is in sheet metal enclosures. Metal enclosures are especially well suited to small-quantity custom orders and to demanding settings where strength and durability are paramount.

Aluminium enclosures have superior electromagnetic shielding (EMI protection) and heat dissipation properties, which is why they are used for enclosures that contain heat-generating sensitive electronics. Stainless steel, on the other hand, offers excellent corrosion resistance and is the material of choice where corrosion is a concern, such as exposure to moisture, chemicals or extreme outdoor conditions.

Plastics (ABS / Polycarbonate)

Plastic enclosures may be more practical in lighter-duty applications or in high-volume consumer electronics. Materials such as ABS and polycarbonate provide high impact resistance (typically up to IK08) as well as natural electrical insulation, which can make design and safety simpler than with metal housings.

The right material depends on the requirements of your application: the surroundings where the enclosure will be used, the level of protection you need, the number of enclosures required and your budget. Our team can help you assess these factors and recommend the most appropriate material for your project.

Why Choose Us as Your Electrical Panel Manufacturer

• Full Custom Design Capability – Enclosures and panels engineered around your exact PCB layout, thermal, and mechanical requirements.

• Wide Material Expertise – From steel and aluminium to stainless steel and engineering plastics.

• Prototype-to-Production Support – Seamless transition from validated prototype to full-scale custom manufacturing.

• Rugged Industrial Build Quality – Welded frames, modular sections, and mounting C-plates for demanding industrial environments.

• Precision Fabrication – Tight tolerances on cut-outs, cable entries, and mounting points for a proper first-time fit.

• Compliance-Focused Design – Attention to relevant electrical and safety standards throughout the design and build process.

• Flexible Order Volumes – From single custom enclosures to full production runs of industrial panels.

• Established Regional Presence – A trusted electrical panel manufacturer in Gujarat, supporting local and regional industrial clients.

Industries We Serve

Our custom enclosure and electrical panel manufacturing capabilities support a wide range of sectors, including:

• Industrial Automation & Plant Machinery

• Power Distribution & Electrical Infrastructure

• Consumer Electronics Manufacturing

• Renewable Energy & Solar Installations

• Telecommunications Equipment

• Instrumentation & Control Systems

• Agricultural & Heavy Equipment Manufacturing

• OEM Electronics Product Development

Our Manufacturing Process

1. Requirement & PCB/Layout Review – We review your internal component layout, thermal considerations, and compliance requirements.

2. Design & CAD Modelling – A detailed enclosure or panel design is developed, including cut-outs, mounting points, and ventilation.

3. Material Selection – The appropriate material — sheet metal, stainless steel, aluminium, or plastic — is selected based on application needs.

4. Prototype (If Required) – For new designs, a prototype enclosure is built and tested for fit and function before full production.

5. Fabrication – Panels and enclosures are cut, formed, and welded (where applicable) to precise specifications.

6. Finishing – Surface treatments such as powder coating or plating are applied as needed for durability and appearance.

7. Quality Inspection – Every unit is checked against drawing specifications before dispatch.

8. Packing & Delivery – Finished enclosures and panels are carefully packed and delivered according to your project timeline.

Electrical Panel Manufacturer in Gujarat

We are a well-established electrical panel manufacturer in Gujarat, providing our clients with high-quality, precisely engineered electrical enclosures and panels for industrial applications, OEMs and electronics manufacturers throughout the region. Our local base means quick delivery of urgent orders, in-person coordination on complex projects and a manufacturing partner that understands the pace and requirements of Gujarat's industrial and manufacturing landscape.

Whether you're looking for a one-off custom electronic enclosure or need a continuous supply of industrial control panels for a production line, we've got you covered for both short-term needs and long-term manufacturing relationships in Gujarat and beyond.

Request a Custom Enclosure or Panel Manufacturing Quote

Need a custom enclosure or electrical panel built around your exact specifications? Share your requirements with us, and our team will guide you through material selection, design, and manufacturing timelines.

Contact us today for reliable custom enclosure and electrical panel manufacturing — precisely engineered, built to last, and ready for your application.